ph: (08) 9204 1999

Air Monitoring

Air contaminant surveys

CHP conduct air monitoring in Perth and around regional WA. Air monitoring, sometimes referred to as an air contaminant survey or dust survey, is conducted by our occupational hygiene specialists to measure and quantify the air contaminant hazards in the workplace environment. To get the most effective information, air monitoring should be arranged on a day when normal work and processing activities are taking place.

What are airborne contaminants?

Airborne contaminants are inhalable particles suspended in the air that may enter the body. Most large particles are stopped in the nose, but smaller respirable particles reach the lungs. Inhaled contaminants may cause tissue damage, tissue reaction, disease, or physical obstruction.

Some of the more common harmful airborne contaminants that require air monitoring include:air monitoring perth

Crystalline silica exposure standard

Silica dust air monitoring is a hot topic right now due to the increasing risk of silicosis among our young trades people.

The mandatory limit WSE for silica dust exposure in Australia is 0.1mg/m3 averaged over an eight hour day. Although the ACGIH have recommended this be limited to 0.025mg/m3. However, there is no evidence to support a safe level of silica dust exposure.

Work Health and Safety (WHS) Regulation 50 states air monitoring by an occupational hygienist must be conducted every 12-18 months if there is health safety risk or if there is potential of exceeding the exposure limit.

The sampling protocol we use is contained in Australian Standard 2985 – 2009 Workplace Atmospheres – Method for sampling and gravimetric determination of respirable dust.

Employers responsibilities for air monitoring

air monitoring perth

You have a ‘Duty of Care’ for ensuring a safe working environment for your employees.

  • In WA, this legislation is governed by WorkSafe
  • Exposure standards have been established in Australia for approximately 700 substances and mixtures.
  • To determine whether an exposure standard is being exceeded, or if there is uncertainty, air monitoring may be required.
  • Health monitoring may also be required for workers who are at risk of exposure to hazardous chemicals or asbestos.

When to do air monitoring

Indicators of a need for air monitoring in your workplace may include:

  • frequent or long duration use of a chemical or process which generates hazardous vapour, dust, mist or fume; and
  • efficiency of ventilation is not known or no mechanical ventilation; and/or
  • people in the workplace are complaining of health concerns that may be due to the vapour, dust, mist or fume; and/or
  • there is the potential for serious health effects if controls are inadequate; and/or
  • it is a complex work environment and it is difficult to estimate exposure.

An air monitoring program

An air monitoring program will usually last for a day, but can be longer if a variety of work processes need examining and, depending on the extent of monitoring required, the nature of the processes and the type of laboratory analyses needed. Airborne hazards in the workplace, such as dusts, gases, vapours, smoke and fumes have the potential to cause or exacerbate a range of serious respiratory disease such as:

  • asthma, asbestosis, silicosis, chronic obstructive pulmonary disease and cancers of the respiratory system (eg. mesothelioma and lung cancer).

With the list of agents of respiratory disease increasing due to improved knowledge, the constant changes in industrial processes and materials, and the long latency of many respiratory diseases, workers’ exposure must be minimised and continuously monitored.

To determine whether an exposure standard is being exceeded, or if there is uncertainty, air monitoring may be required. Health monitoring may also be required for workers who are at risk of exposure to hazardous dusts, chemicals or asbestos.

Request pricing

Health Surveillance following air monitoring

  • Health surveillance, also known as health monitoring, takes into account all routes of exposure and not just exposure by inhalation of airborne contaminants. This includes skin exposure.
  • It will usually include a lung function test or spirometry.
  • This is needed to measure and monitor employees for any negative health effects due to exposure to dust, diesel exhaust, silica, acrylamides, isocyanates, solvents etc.

CHP specialises in onsite Health Montoring programs in Perth and around WA.

Hazardous exposures

The construction and manufacturing industries are designated as a priority industry for work health and safety as per the 2012-22 Australian Work Health and Safety Strategy.

Safe Work Australia’s report, released February 2015, includes self-reported exposure to disease-causing hazards by workers in the construction and manufacturing industries.

Safe Work Australia has also produced an informative publication on “Workplace exposure standards for airborne contaminants“.

Air monitoring in the Construction Industry

The most common disease-causing hazard exposure reported by workers in the construction industry was airborne hazards (69%). Types of airborne hazards reported by workers included dust (66%) and gases, vapours or fumes (24%).

Types of dust reported by construction workers included:air monitoring perth

  • silica
  • acrylic materials
  • dust from machinery
  • alumina/ aluminum dust
  • brake dust
  • bricks
  • concrete
  • dirt
  • plaster
  • sand and timber.

Gases, vapours and fumes reported by construction workers included exhaust fumes, paint fumes and petrol/ diesel fumes.

The main occupations exposed to airborne hazards were technicians and trades workers (56%), labourers (14%), machinery operators and drivers and managers (11%).

Air monitoring in the Manufacturing Industry

The most common hazardous workplace exposure reported by manufacturing workers was also exposure to airborne hazards (64%).

Types of airborne hazards reported by these workers included:air monitoring perth

  • steam
  • welding fumes
  • exhaust fumes
  • forklift gas
  • glue vapours
  • oxyacetylene fumes
  • paint fumes or spray painting fumes, and
  • smoke from furnaces and ovens.

The second most common hazard exposure reported in manufacturing was noise (58%).

Request a quote